Customization: | Available |
---|---|
Application: | Underground |
Voltage: | High Voltage Cable |
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Brief introduction of High Quality 8.7/15kv 3x185mm2 3*150mm2 Armoured Medium Voltage Power Cable Xlpe Insulated Copper Electric Power cable with armored
Product model: XLPE insulated PVC sheathed copper core power cable
Number of product cores: 1, 3 cores
Product specifications: 25mm²--630mm²
Product colour: Black; other colours can be customized.
Rated voltage: 3.6/6, 6/6, 6/10, 8.7/10, 8.7/15, 12/20, 18/20, 18/30, 21/35, 26/35.
The length of the whole plate: 100m/500m (national standard full meter).
Product name
|
XLPE Insulated 11kv 35KV 66kv 3 Core 120mm2, 150mm2, 185mm2 240mm2 Pure Copper High Voltage Power Cable with Armored
|
Insulation
|
XLPE
|
Model
|
WDZ-YJY/YJLY/YJV22/YJV32
|
Temperature
|
90°C
|
Rated voltage
|
0.6/1kv 8.7/15KV 26/35KV
|
Standard
|
IEC 60502-2
|
Specification
|
1.5-630mm²
|
Sheath
|
PVC
|
Core number
|
1/2/3/3+1/3+2/4/4+1/5
|
Application
|
widely used in nuclear power stations, subway stations, telephone exchanges and computer control centers, high-rise
buildings, hotels, radio and television stations, important military facilities, oil platforms, and other places where people are concentrated and air density is low. |
Conductor
|
Copper/Aluminum
|
Armour
|
STA(optional)/ SWA or no Armored
|
Maximum conductor temperature during normal operation: 70°C for PVC insulation, 90°C for XLPE insulation.
Installation and laying temperature: The installation and laying temperature of the cable should be not lower than 0ºC.
Maximum temperature of the cable conductor during short circuit (maximum duration not exceeding 5 seconds): PVC insulation - 160°C for conductor cross-section ≤ 300 mm2, 140°C for conductor cross-section > 300 mm2; 250°C for XLPE insulation.
Scope of application: This product is suitable for use in lines with an AC rated voltage U0/U of 26/35kV for transmission and distribution lines.
Minimum bending radius allowed: Single-core cable: 20D without armour, 15D with armour Multi-core cable: 15D without armour, 12D with armour Where: D - actual outer diameter of the cable.