450/750 Volt Industrial Fixed Wiring Cable with PVC H07V-R for Use in Conduit or Trunking

---------------------------------------------------------
 

---------------------------------------------------------
 

Use characteristics: the long-term allowable working temperature of the cable core should not exceed 70ºC, BV-90 type should not exceed 90ºC, the short-term working temperature can be raised to 105ºC, the laying temperature of the cable should not be lower than 0ºC.
 

Allowable bending radius: when the cable outer diameter (D) is less than 25mm, the allowable bending radius of the cable should be not less than 4D; when the cable outer diameter (D) is 25mm and above, the allowable bending radius of the cable should be not less than 6D.

H07V-R is single core cable and a type of low voltage house wiring cable, which is often used in houses, offices, electrical control panels, and industrial lighting. The conductor is pure copper and the high-quality PVC insulation to protect the copper core from external damage will increase the service life of wires and cables.
 

1. Pure copper conductor, the use of pot technology to eliminate internal stress, avoiding unevenness at both ends caused by continuous pulling and retreating, has good electrical conductivity and safety.

2. The environmentally-friendly PVC raw material, good insulation performance, scratch resistance, abrasion resistance, good toughness.

3. The low eccentricity of the wire and cable, the uniform insulation prevents the cable from breaking down and ensures the safety of electricity.

The product is suitable for fixed installation of power plant with rated AC voltage up to and including 450/750V. Such as home decoration lighting. Fixed wiring can be used for indoor open coating, pipe piercing and other occasions. In order to facilitate the difference in the installation process, it can be divided into seven colors: red, yellow, blue, green, black, white and double. As BVR is soft structure, its application scope is mostly in soft environment. 

The only difference between BVR wire and BV wire is that the diameter of the R wire conductor is soft copper wire. That is, increase the number of conductors and reduce the diameter of a single conductor. The diameter of a single conductor is less than 1 mm. In this way, BVR wire is very soft, laying Angle requirements are greatly reduced than BV wire, threading pipe, groove more convenient, fast, reduce the working intensity while greatly improving the work efficiency. By the majority of electricians and architectural decoration personnel like!